Ấn phẩm:
A high-efficiency positive buck–boost converter with three-mode selection circuit and soft start circuit
Đang tải...
Xem mô tả
1
Xem & Tải
0
Nhan đề khác
Tóm tắt
Positive Buck-Boost converters are considered the optimal choice for battery-powered applications that require high power conversion efficiency and extend battery life. The converter offers versatility in processing input voltages over a wide range thanks to its three operating modes: Boost, Buck, and Buck-Boost (Bck-Bst) while maximizing battery capacity. The efficiency of the converter can be severely affected by a severe ripple in the output voltage and current when transitioning between modes. To reduce the output instability and output ripple during operation, a three-mode selection circuit that uses a very small delay between mode transitions is proposed to minimize the above effects. The proposed chip was designed and implemented on CMOS 0.18 µm process. In addition, a high peak efficiency of 95.6 % can be achieved under the conditions of a wide input range of 2.5 V - 5 V.
Mô tả
Vietnam Journal of Science and Technology, Vol. 63, No. 4
Tác giả
Nguyen, Van Tuan
Hoang, Manh Kha
Pham, Xuan Thanh
Người hướng dẫn
Nơi xuất bản
Nhà xuất bản
Viện Kỹ thuật Nhiệt đới, Viện Hàn lâm Khoa học và Công nghệ Việt Nam
Năm xuất bản
2025-08
ISSN tạp chí
Nhan đề tập
Từ khóa chủ đề
Three-Mode Selection , DC-DC Converter , Soft Start , Integrated Power Management
URI
Tài liệu tham khảo
Thông tin bản quyền
Tệp tin
Van Tuan Nguyen,Manh Kha Hoang,Xuan ThanhPham.pdf
Dung lượng: 2.14 MBĐịnh dạng: pdf
Lượt xem: 0 Lượt tải: 0